Clicky

RTE 29.5cc Competition Engine

$599.00
(No reviews yet) Write a Review

We have updated the porting in the 2018 version which gives a better power curve and even more torque.

The 29.5cc is easy starting, runs cool, simple to tune and would be the most versatile engine around.

Big punch off the mark, lasts 30 minute finals and pulls a very respectable 19k under heavy load.

With the increased stroke you will experience more torque and horsepower, with higher rpm.

This winning combination will definitely slap a smile on your dial.

Rooster Tail Engines are designed, hand built and professionally assembled by a qualified mechanical tradesperson.

Comes supplied with a detailed running in procedure.

The lead time can be up to 14 days, please email for an accurate time frame.

All workmanship on these high-performance engines is guaranteed.  The engines do not come with warranty.

Engine Upgrade Options

Carby - Bearing Modified

Sealed stainless steel bearings installed on both ends of the throttle shaft for the ultimate sand ingress protection. Also increases the life of the throttle shaft and bore.

Carby - Competition Modified

Sealed stainless steel bearings installed on both ends of the throttle shaft for the ultimate sand ingress protection. And additional upgrades to increase fuel and air flow.

Carby - Fully Modified

The same modifications as the Bearing and Competition modified options with additional changes to increase cfm and response time. Will produce 500+ rpm to a fully modified engine with a boost to the low and mid. 

Clutch - Performance

Fully balanced and lightened for quicker response time and cooler running.

Engine Bearings - Ceramic

High quality, full ceramic bearings for quicker spool up times, higher rpms and overall engine weight reduction.

Flywheel - Fully Modified

Lightened and balanced for quicker acceleration and higher rpm without sacrificing integrity. Will not fly apart at high rpm.

Gaskets – RTE High Temp

Our special gaskets are designed to stop heat transfer from the engine to the carburettor.

Seals - Viton Longlife

High quality crankcase seals for high temperature and drag reduction to increase cycle life.

Suits: Baja 5B/5T/5SC, Losi 5ive-T/5ive-B/DBXL, Kraken Vekta.5

PLEASE NOTE: If fitting this engine to a Losi you will need a CY Fan Cover.