The newly designed 30.5cc engine for 2018 packs even more punch, is easy starting, runs cool, and is simple to tune.
This engine will still last a 30 minute final and pulls a very respectable 19k under heavy load.
We use a genuine Zenoah 2mm crank, the crankcases are set up perfectly, beautifully hand-ported cylinder with Rooster Tails special combustion chamber and milled, modified and lightened piston.
How can you beat that? This winning design will definitely have you out in front of the pack on the track or out bashing with your mates.
Rooster Tail Engines are designed, hand built and professionally assembled by a qualified mechanical tradesperson.
Comes supplied with a detailed running in procedure.
The lead time can be up to 14 days, please email for an accurate time frame.
All workmanship on these high-performance engines is guaranteed. The engines do not come with warranty.
Engine Upgrade Options
Carby - Bearing Modified
Sealed stainless steel bearings installed on both ends of the throttle shaft for the ultimate sand ingress protection. Also increases the life of the throttle shaft and bore.
Carby - Competition Modified
Sealed stainless steel bearings installed on both ends of the throttle shaft for the ultimate sand ingress protection. And additional upgrades to increase fuel and air flow.
Carby - Fully Modified
The same modifications as the Bearing and Competition modified options with additional changes to increase cfm and response time. Will produce 500+ rpm to a fully modified engine with a boost to the low and mid.
Clutch - Performance
Fully balanced and lightened for quicker response time and cooler running.
Engine Bearings - Ceramic
High quality, full ceramic bearings for quicker spool up times, higher rpms and overall engine weight reduction.
Flywheel - Fully Modified
Lightened and balanced for quicker acceleration and higher rpm without sacrificing integrity. Will not fly apart at high rpm.
Gaskets – RTE High Temp
Our special gaskets are designed to stop heat transfer from the engine to the carburettor.
Seals - Viton Longlife
High quality crankcase seals for high temperature and drag reduction to increase cycle life.
Suits: Baja 5B/5T/5SC, Losi 5ive-T/5ive-B/DBXL, Kraken Vekta.5
PLEASE NOTE: If fitting this engine to a Losi you will need a CY Fan Cover.
1 Review Hide Reviews Show Reviews