Hitec HS-7954SH Servo

Hitec

Was: $179.00
Now: $130.00
(No reviews yet) Write a Review
Adding to cart… The item has been added

Hitec HS-7954SH Hi-Voltage Ultra-Torque Universal Servo

Featuring 403 oz/in of torque, at 7.4V at a speed of .12 sec/60 deg.

The servo comes with a universal connector allowing it to be used with JR, Futaba, Hitec, Airtronics, and most other current radio systems.

Ideal for giant scale planes, large helicopters, rock crawlers, monster trucks, 1/8 scale trucks and buggies and anywhere a high-performance, high torque servo is needed

The HS-7954SH could be considered the most economical high voltage, high torque, coreless servo on the market.

Based on the ultra popular HS-7955TG has the added benefit of a high voltage coreless motor. With 403 inch-ounces of torque at 7.4 volts, the HS-7954SH is fast too with a 0.12 second transit time when operating on a 2 cell LiPo pack.

The HS-7954SH harnesses all this power is by utilizing a heavy duty case that incorporates an aluminum heat sink, hardened steel gears, two strong steel gear pins nested in brass axial bushings. Put it all together and you get one tough high voltage servo at a price that can't be beat.

Features:

  • Li-Po cell compatible
  • Fully programmable digital technology
  • G2 Digital Circuit
  • HV Coreless Motor for precise centering and accuracy
  • Dual Ball Bearing Supported Output Shaft
  • Steel Gear Train (MK first gear)

Programable Features Include:

  • Dead Band Width
  • Direction of Rotation
  • Speed of Rotation (slower)
  • End Points
  • Neutral Points
  • Fail Safe On/Off
  • Fail Safe Point
  • Resolution* (default is high resolution)
  • Overload Protection* (default is off)

*these features are only programmable with the HFP-20 field programmer (HRC44430)

Specifications:

Size Category: Standard
Type: Digital
Torque: 333 oz-in (24.0kg-cm) @ 6V; 403 oz-in (28.8kg-cm) @ 7.4V
Speed: 0.15 sec/60 deg @ 6V; 0.12 sec/60 deg @ 7.4V
Length: 1.57 in (39.0mm)
Width: 0.78 in (20.0mm)
Height: 1.45 in (36.0mm)
Weight: 2.30 oz (64.0g)
Bushing Or Bearing: Bearing
Bearing: Dual
Motor Type: Coreless
Connector Type: Universal
Gear Type: Metal
Voltage: 6.0-7.4V
Deadband: Programmable

Includes:

HS-7954SH High-Voltage Ultra Torque Servo, 1.8" (45mm) diameter round horn, 2.3" (59mm) long double sided horn, 2.8" (72mm) long double sided horn, 1.3" (34mm) single sided horn, 0.83" (21mm) single sided aluminum horn, 0.98" (25mm) single sided horn, four each grommets, eyelets and mounting screws, instruction sheet