RTE 30.5cc Full Mod Engine

The Full Mod 30.5cc engine is the king of the G290 range.  It goes hard, and with the extra torque, it out accelerates the 29.5cc.

This engine has a fully modified Zenoah 2mm crank, fully modified crankcases set up perfectly, beautifully hand-ported cylinder with Rooster Tails special combustion chamber and milled, modified and lightened piston. How can you beat that?

This combination produces huge increases of power everywhere and an even larger increase of torque, while still retaining the ability to rev really high.

If you can handle it, and you want to be out in front, you'll need the 30.5cc from Rooster Tail Engines.

Our full mod range of engines now come standard our high temp gaskets (carby and manifold), and a RTE Bearing Modified carburettor which has sealed stainless steel bearings installed on both ends of the throttle shaft for the ultimate sand ingress protection. Also increases the life of the throttle shaft and bore.

Rooster Tail Engines are designed, hand built and professionally assembled by a qualified mechanical trades person with over 25 years experience in making high performance race engines, carburettors, and clutches.

Comes supplied with a detailed running in procedure.

The lead time can be up to 14 days, please email for an accurate time frame.

All workmanship on these high-performance engines is guaranteed.  The engines do not come with warranty.

Engine Upgrade Options

Carby - Competition Modified

Sealed stainless steel bearings installed on both ends of the throttle shaft for the ultimate sand ingress protection. And additional upgrades to increase fuel and air flow.

Carby - Fully Modified

The same modifications as the Bearing and Competition modified options with additional changes to increase cfm and response time. Will produce 500+ rpm to a fully modified engine with a boost to the low and mid. 

Clutch - Performance

Fully balanced and lightened for quicker response time and cooler running.

Engine Bearings - Ceramic

High quality, full ceramic bearings for quicker spool up times, higher rpms and overall engine weight reduction.

Flywheel - Fully Modified

Lightened and balanced for quicker acceleration and higher rpm without sacrificing integrity. Will not fly apart at high rpm.

Seals - Viton Longlife

High quality crankcase seals for high temperature and drag reduction to increase cycle life.

Suits: Baja 5B/5T/5SC, Losi 5ive-T and 2.0/5ive-B/DBXL, Kraken Vekta.5