RTE 35cc Full Mod Engine - Piston Port

Rooster Tail Engines

$1,280.00
(No reviews yet) Write a Review
Adding to cart… The item has been added

The RTE Full Mod 35cc complete engine is here!

The new 35cc porting for 2024 offers significant increase in torque which translates to an increase rpm also.

The 35cc uses a high quality, modified 2.8mm crankshaft.  You will not believe the power we have squeezed out of this bad boy. 

This engine has a beautifully hand-ported cylinder with Rooster Tails special combustion chamber and milled, modified and lightened piston. How can you beat that?

We have updated the porting for unbelievable performance increases.

If you can handle it, and you want to be out in front, you'll need the new 35cc from Rooster Tail Engines.

With all the Full Mod upgrades you will experience performance never seen before from a small block engine, anywhere!

Rooster Tail Engines are designed, hand built and professionally assembled by a qualified mechanical trades person with over 25 years experience in making high performance race engines, carburettors, and clutches.

Comes supplied with a detailed running in procedure.

The Full Mod version uses a NGK CMR7A spark plug (supplied).

The lead time can be up to 14 days, please email for an accurate time frame.

All workmanship on these high-performance engines is guaranteed.  The engines do not come with warranty.

Engine Upgrade Options

Carby - Bearing Modified

We have designed a new bearing and seal arrangement to stop throttle plate wear on the bore, which causes idle tune issues and deceleration seizures.  Sealed stainless steel bearings installed on both ends of the throttle shaft and o-rings to locate the shaft and lock the bearings in place.

Carby - Competition Modified

As per Bearing Modified with additional upgrades to increase fuel and air flow. Will produce 500+ rpm to a fully modified engine with a boost to the low and mid. 

Carby - Fully Modified

As per Competition Modified with additional changes to increase cfm and response time. Will produce 1000+ rpm to a fully modified engine with a boost to the low and mid.

Carby - Fully Modified Animal WT-1048

As per Fully Modified with additional changes to increase cfm and response time, fuel circuit upgrades and a huge increase in signal strength. Will produce 1500+ rpm to a fully modified engine with incredible boost to the low and mid.  The WT-1048 does not have a manual priming circuit.  This carburettor is not in specification for racing rules (ARCMACC & EFRA LEGAL).

Clutch - Performance

Fully balanced and lightened for quicker response time and cooler running.

Clutch - Full Mod

Fully balanced and lightened steel shoes for long life and superior lock up.  Quicker response time and cooler running.  Insane clutch for drag racing.

Flywheel - Fully Modified

Lightened and balanced for quicker acceleration and higher rpm without sacrificing integrity.  Will not fly apart at high rpm.

Seals - RTE Full Mod Seal Arrangement

We designed a new seal to stop vacuum leaks which cause dust ingression, which destroys engine bearings and cylinder plating.  Our new seal arrangement provides a very long life and a higher quality tune.

Intake System

We have provided a discount on our intake system if you purchase as part of this complete engine.  If you are serious about maximum performance and reliability, this system will deliver.  Parts will be assembled on the engine at no extra cost.

Please see the following links for a detailed description of these parts.

RTE Super Charger Velocity Stack

RTE Raptor Manifold Kit G320

RTE Super Flow Fuel Line Kit

Suits: Baja 5B/5T/5SC, Losi 5ive-T and 2.0/5ive-B/DBXL, Kraken Vekta.5