The Rooster Tail Full Mod G320RC engine is a powerhouse that really sets the bar to new levels.
The cases are set to our specs to handle the big power that pours out of this engine.
With a very user friendly combination of easy starting, easy tuning, consistent idling and excellent performance in the hot weather, the Rooster Tail Full Mod G320 will run flawlessly, tank after tank.
Did I mention the blistering acceleration, smooth power band and a screaming top end?
This engine is all genuine Zenoah with some Rooster Tail magic.
Our full mod range of engines now come standard our high temp gaskets (carby and manifold).
Rooster Tail Engines are designed, hand built and professionally assembled by a qualified mechanical tradesperson.
Comes supplied with a detailed running in procedure.
The lead time can be up to 14 days, please email for an accurate time frame.
All workmanship on these high-performance engines is guaranteed. The engines do not come with warranty.
Engine Upgrade Options
Carby - Bearing Modified
Sealed stainless steel bearings installed on both ends of the throttle shaft for the ultimate sand ingress protection. Also increases the life of the throttle shaft and bore.
Carby - Competition Modified
Sealed stainless steel bearings installed on both ends of the throttle shaft for the ultimate sand ingress protection. And additional upgrades to increase fuel and air flow.
Carby - Fully Modified
The same modifications as the Bearing and Competition modified options with additional changes to increase cfm and response time. Will produce 500+ rpm to a fully modified engine with a boost to the low and mid.
Clutch - Performance
Fully balanced and lightened for quicker response time and cooler running.
Engine Bearings - Ceramic
High quality, full ceramic bearings for quicker spool up times, higher rpms and overall engine weight reduction.
Flywheel - Fully Modified
Lightened and balanced for quicker acceleration and higher rpm without sacrificing integrity. Will not fly apart at high rpm.
Seals - Viton Longlife
High quality crankcase seals for high temperature and drag reduction to increase cycle life.
Suits: Baja 5B/5T/5SC, Losi 5ive-T/5ive-B/DBXL, Kraken Vekta.5
PLEASE NOTE: If fitting this engine to a Losi you will need a CY Fan Cover.